MALAYSIA
Approved Standards
MS IEC 61000-6-3 : 2000
Electromagnetic compatibility (EMC) - Part 6 : Generic standards - Section 3 : Emission standard for residential, commercial and light-industrial environments
MS IEC 61000-6-4 : 2000
Electromagnetic compatibility (EMC) - Part 6 : Generic standards - Section 4 : Emission standard for industrial environments
MS CISPR 14 : 2000
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and electric apparatus
MS CISPR 14-2 : 2000
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : Immunity - Product family standard
MS IEC 61000-3-2 : 2000
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 2 : Limits for harmonic current emissions (equipment input current 16 A per phase)
MS IEC 61000-3-3 : 2000
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A
MS IEC 61000-4-2 : 2000
Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques Section 2 : Electrostatic discharge immunity test Basic EMC publication
MS IEC 61000-4-11 : 2000
Electromagnetic compatibility (EMC) - Part 4 : Testing and measuring techniques - Section 11 : Voltage dips, short interruptions and voltage variations immunity tests
MS IEC 61000-4-4 : 2000
Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques Section 4 : Electrical fast transient/burst immunity test Basic EMC publication
MS IEC 61000-4-5 : 2000
Electromagnetic compatibility (EMC) - Part 4 : Testing and measurement techniques - Section 5 : Surge immunity test
MS CISPR 22 : 2000
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
MS CISPR 11 : 2000
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
MS CISPR 12 : 2000
Vehicles, motorboats and spark-ignited engine-driven devices - Radio disturbance characteristics - Limits and methods of measurement
MS CISPR 13 : 2000
Limits and method of measurement of radio interference characteristic of sound and television broadcast receivers and associated equipment
MS CISPR 15 : 2000
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
MS CISPR 20 : 2000
Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment
MS IEC 61000-6-1 : 1997
Electromagnetic compatibility (EMC) - Part 6 : Generic standards - Section 1 : Immunity for residential, commercial and light-industrial environments
MS IEC 61000-4-16 : 2000
Electromagnetic compatibility (EMC) - Part 4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 KHz
MS IEC 61000-4-12 : 2000
Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques - Section 12 : Oscillatory waves immunity test Basic EMC publication
MS IEC 61000-4-10 : 2000
Electromagnetic compatibility (EMC) - Part 4 : Testing and measurement techniques - Section 10 : Damped oscillatory magnetic field immunity test Basic EMC publication
MS IEC 61000-4-8 : 2000
Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques Section 8 : Power frequency magnetic field immunity test Basic EMC publication
MS IEC 61000-4-7 : 2000
Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques Section 7: General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
MS IEC 61000-4-6 : 2000
Electromagnetic compatibility (EMC) - Part 4 : Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
MS IEC 61000-4-3 : 2000
Electromagnetic compatibility (EMC) - Part 4 : Testing and measurement techniques - Section 3 : Radiated, radio-frequency, electromagnetic field immunity test
MS IEC 61000-3-5 : 2000
Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 5 : Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
MS CISPR 24 : 2000
Information technology equipment - Immunity characteristics - Limits and methods of measurement
MS CISPR Publication 19 : 2000
Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz
MS CISPR 16-1 : 2000
Specification for radio disturbance and immunity measuring apparatus and methods Part 1 : Radio disturbance and immunity measuring apparatus
MS IEC 60335-2-60 : 2000
Safety of household and similar electrical appliances - Part 2 : Particular requirements for whirlpool baths
MS IEC 60335-2-55 : 2000
Safety of household and similar electrical appliances Part 2 : Particular requirements for electrical appliances for use with aquariums and garden ponds
MS IEC 60335-2-81 : 2000
Safety of household and similar electrical appliances Part 2 : Particular requirements for foot warmers and heating mats
MS IEC 60335-2-64 : 2000
Safety of household and similar electrical appliances Part 2 : Particular requirements for commercial electric kitchen machines
MS IEC 60335-2-59 : 2000
Safety of household and similar electrical appliances Part 2 : Particular requirements for insect killers
MS IEC 60335-2-21 : 2000
Safety of household and similar electrical appliances - Part 2 : Particular requirements for storage water heaters
MS ISO 445 : 2000
Pallets for materials handling - Vocabulary
(Supersedes MS 1171 : 1989)
MS ISO/IEC Guide 65 : 2000
General requirements for bodies operating product certification systems
(Supersedes MS EN 45011 : 1994)
MS ISO/IEC Guide 66 : 2000
General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS)
MS ISO/IEC Guide 22 : 2000
General criteria for supplier’s declaration of conformity
MS ISO/IEC Guide 43-1 : 2000
Proficiency testing by interlaboratory comparisons - Part 1 : Development and operation of proficiency testing schemes
MS ISO/IEC Guide 43-2 : 2000
Proficiency testing by interlaboratory comparisons - Part 2 : Selection and use of proficiency testing schemes by laboratory accreditation bodies
MS ISO 14024 : 2000
Environmental labels and declarations - Type I Environmental labelling - Principles and procedures
MS ISO 14041 : 2000
Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis
MS 1490 : 2000
Specification for hot rolled non-alloy structural steel section and H-Piles
MS 1491 : 2000
Specification for dimensions, mass and tolerances of hot rolled steel sections and H-Piles
MS 1492 : 2000
Specification for arc welding of carbon and carbon manganese structural steels
MS 1493 : 2000
Specification for direct reduced iron (DRI)
MS 1494 : 2000
Specification for billets for hot rolled non-alloyed steel bars and rods
MS 1495 : 2000
Specification for blooms for hot rolled non-alloyed structural steel sections
MS 1496 : 2000
Specification for beam blanks for hot rolled non-alloyed structural steel sections
MS ISO 14718 : 2000
Animal feeding stuffs - Determination of Aflatoxin B1 content of mixed feeding stuffs - Method using high-performance liquid chromatography
MS 1365 : Part 2 : 2000
Method of test for determination of standard of fineness for precious metals : Part 2 : Silver and articles of silver by titrimetric (potentiometric) method
MS 1497 : 2000
Methods of biological evaluation of the efficacy of repellent - Bioassay method for mosquito repellent on human skin
MS 133 : Part E9 : 2000
Methods of test for paints and varnishes : Part E9 : Buchholz indentation test
MS 133 : Part E10 : 2000
Methods of test for paints and varnishes : Part E10 : Pull-off test for adhesion
MS 133 : Part E11 : 2000
Methods of test for paints and varnishes : Part E11 : Bend test (Conical mandrel)
MS 133 : Part E12 : 2000
Methods of test for paints and varnishes : Part E12 : Indentation test (Spherical or pyramidal)
MS 1498 : 2000
Specification for tempered glass
MS 616 : Part 2 : Section 1 : 2000
Switches for household and similar fixed electrical installations : Part 2 : Particular requirements : Section 1 : Electronic switches
MS 616 : Part 2 : Section 2 : 2000
Switches for household and similar fixed electrical installations : Part 2 : Particular requirements : Section 2 : Electromagnetic remote-control switches (RCS)
MS 616 : Part 2 : Section 3 : 2000
Switches for household and similar fixed electrical installations : Part 2 : Particular requirements : Section 3 : Time delay switches (TDS)
MS IEC 60947-2 : 2000
Low-voltage switchgear and controlgear - Part 2 : Circuit breakers
MS IEC 60947-3 : 2000
Low-voltage switchgear and controlgear - Part 3 : Switches, disconnectors, switch-disconnectors and fuse-combination units
MS ISO 4545 : 2000
Metallic materials - Hardness test - Knoop test
MS ISO 4546 : 2000
Metallic materials - Hardness test - Verification of Knoop hardness testing machines
MS ISO 4547 : 2000
Metallic materials - Hardness test - Calibration of standardized blocks to be used for Knoop hardness testing machines
MS ISO 1024 : 2000
Metallic materials - Hardness test - Rockwell superficial test (Scales 15N, 30N, 45N, 15T, 30T and 45T)
MS ISO 1355 : 2000
Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (Scales 15N, 30N, 45N, 15T, 30T and 45T)
MS ISO 1079 : 2000
Metallic materials - Hardness test - Verification of Rockwell superficial hardness testing machines (Scales 15N, 30N, 45N, 15T, 30T and 45T)
MS ISO 9735-1 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 1 : Syntax rules common to all parts, together with syntax service directories for each of the parts
MS ISO 9735-2 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 2 : Syntax rules specific to batch EDI
MS ISO 9735-3 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 3 : Syntax rules specific to interactive EDI
MS ISO 9735-4 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 4 : Syntax and service report message for batch EDI (message type - CONTROL)
MS ISO 9735-5 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - (Syntax version number : 4) - Part 5 : Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
MS ISO 9735-6 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - (Syntax version number : 4) - Part 6 : Secure authentication and acknowledgement message (message type - AUTACK)
MS ISO 9735-8 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 8 : Associated data in EDI
MS ISO 9735-9 : 2000
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number : 4) - Part 9 : Security key and certificate management message (message type - KEYMAN)
MS 1499 : Part 1 : 2000
Sensory evaluation : Part 1 : Vocabulary
MS 1500 : 2000
General guidelines on the production, preparation, handling and storage of halal food
MS 1500 : 2000
Garis panduan umum mengenai pengeluaran, penyediaan, pengendalian dan penyimpanan makanan halal
MS 1501 : 2000
Method of test for measuring shrinkage from mould dimensions of moulded plastics
MS ISO 6471 : 2000
Rubber, vulcanized - Determination of crystallization effects under compression
MS ISO 1432 : 2000
Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
MS ISO 1433 : 2000
Rubber, vulcanized - Preferred gradations of properties
MS ISO 2393 : 2000
Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
MS ISO 7619 : 2000
Rubber - Determination of indentation hardness by means of pocket hardness meters
(Supersedes MS 1157 : Part 17 : 1993)
MS ISO 3167 : 2000
Plastics - Multipurpose test specimens
MS ISO 4589-1 : 2000
Plastics - Determination of burning behaviour by oxygen index - Part 1 : Guidance
MS ISO 4589-2 : 2000
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient - temperature test
MS 1502 : 2000
Specification for disposable polystyrene cutlery
MS ISO 7057 : 2000
Plastics laboratory ware - Filter funnels
MS ISO 6706 : 2000
Plastics laboratory ware - Graduated measuring cylinders
MS ISO 7056 : 2000
Plastics laboratory ware - Beakers
MS 1503 : 2000
Plastics laboratory ware - Wash bottles
MS ISO 8985 : 2000
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
MS 1504 : 2000
Method of test for determination of thickness for flexible plastics laminates
MS 1505 : 2000
Method of test for determination of bond strength for flexible plastics laminates
MS ISO 1496-5 : 2000
Series 1 freight containers - Specification and testing - Part 5 : Platform and platform-based containers
(Supersedes MS 487 : Part 5 : 1981 and MS 487 : Part 6C : 1981)
MS 1506 : 2000
Specification for wooden door
MS ISO 3166-1 : 2000
Codes for the representation of names of countries and their subdivisions - Part 1 : Country codes
(Supersedes MS ISO 3166 : 1995)
MS ISO 3166-2 : 2000
Codes for the representation of names of countries and their subdivisions - Part 2 : Country subdivision code
(Supersedes MS ISO 3166 : 1995)
MS ISO 3166-3 : 2000
Codes for the representation of names of countries and their subdivisions - Part 3 : Code for formerly used names of countries
(Supersedes MS ISO 3166 : 1995)
MS ISO 4217 : 2000
Codes for the representation of currencies and funds
Revised Standards
MS 1170 : 2000
Specification for double-deck flat wooden pallets for through transit of goods (First revision)
(Supersedes MS 1170 : 1989)
MS 1174 : 2000
Specification for large wooden pallets for through transit of goods (First revision)
(Supersedes MS 1174 : 1989)
MS 954 : Part 1 : 2000
Methods of test for meat and meat products : Part 1 : Determination of moisture content (First revision)
(Supersedes MS 954 : Part 1 : 1985)
MS 954 : Part 2 : 2000
Methods of test for meat and meat products : Part 2 : Determination of total ash (First revision)
(Supersedes MS 954 : Part 2 : 1985)
MS 954 : Part 5 : 2000
Methods of test for meat and meat products : Part 5 : Determination of free fat content (First revision)
(Supersedes MS 954 : Part 5 : 1985)
MS 954 : Part 9 : 2000
Methods of test for meat and meat products : Part 9 : Determination of hydroxyproline content (First revision)
(Supersedes MS 954 : Part 9 : 1985)
MS 954 : Part 12 : 2000
Methods of test for meat and meat products : Part 12 : Determination of chloride content (as sodium chloride) (First revision)
(Supersedes MS 954 : Part 1 : 1987)
MS ISO 5983 : 2000
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Kjeldahl method (First revision)
(Supersedes MS ISO 5983 : 1996)
MS ISO 6491 : 2000
Animal feeding stuffs - Determination of phosphorus content - Spectrometric method (First revision)
(Supersedes MS ISO 6491 : 1996)
MS ISO 6498 : 2000
Animal feeding stuffs - Preparation of test samples (First revision)
(Supersedes MS ISO 6498 : 1996)
MS 133 : Part E1 : 2000
Methods of test for paints and varnishes : Part E1: Bend test (Cylindrical mandrel) (First revision)
(Supersedes MS 133 : Part E1 : 1973)
MS 133 : Part E2 : 2000
Methods of test for paints and varnishes : Part E2 : Scratch test (First revision)
(Supersedes MS 133 : Part E2 : 1973)
MS 133 : Part E3 : 2000
Methods of test for paints and varnishes : Part E3 : Resistance to impact (Falling-weight test) (First Revision)
(Supersedes MS 133 : Part E3 : 1973)
MS 133 : Part E4 : 2000
Methods of test for paints and varnishes : Part E4 : Cupping test (First Revision)
(Supersedes MS 133 : Part E4 : 1973)
MS 133 : Part E5 : 2000
Methods of test for paints and varnishes : Part E5 : Pendulum damping test (First Revision)
(Supersedes MS 133 : Part E5 : 1978)
MS 133 : Part E6 : 2000
Methods of test for paints and varnishes : Part E6 : Cross-cut test (First Revision)
(Supersedes MS 133 : Part E6 : 1976)
MS 133 : Part E7 : 2000
Methods of test for paints and varnishes : Part E7 : Resistance to impact (Falling ball test) (First Revision)
(Supersedes MS 133 : Part E7 : 1980)
MS 564 : 2000
Method of sampling liquefied petroleum gases (LPG) (First revision)
(Supersedes MS 564 : 1978)
MS 573 : 2000
Method of test for vapour pressure of liquefied petroleum gases (LPG method) (First revision)
(Supersedes MS 573 : 1979)
MS 983 : 2000
Specification for ‘KELUAR’ Signs (Internally illuminated) (Second Revision)
(Supersedes MS 983 : 1991)
MS 146 : 2000
Specification for hot rolled steel bars for the reinforcement of concrete (Second revision)
(Supersedes MS 146 : 1988)
Withdrawn Standards
MS 118 : Part 1 : 1996
Specification for motor vehicle gasoline : Part 1 : Leaded gasoline (Third revision)
MS EN 45011 : 1994
Specification for general criteria for certification bodies operating product certification
MS 1171 : 1989
Specification for pallets for materials handling - Vocabulary
MS 1170 : 1989
Specification for double-deck flat pallets for through transit of goods
MS 1174 : 1989
Specification for large pallets for through transit of goods
MS 1157 : Part 17 : 1993
Methods of test for vulcanized rubber : Part 17 : Determination of indentation hardness by means of pocket hardness meters
MS 487 : Part 5 : 1981
Series 1 freight containers - Specification and testing - Part 5 : Platform (Container)
MS 487 : Part 6C : 1981
Series 1 freight containers - Specification and testing - Part 6C : Platform-based containers, open-sided with complete supersructure.
MS 954 : Part 1 : 1985
Methods of test for meat and meat products : Part 1 : Determination of moisture content
MS 954 : Part 2 : 1985
Methods of test for meat and meat products : Part 2 : Determination of total ash
MS 954 : Part 5 : 1985
Methods of test for meat and meat products : Part 5 : Determination of free fat content
MS 954 : Part 9 : 1985
Methods of test for meat and meat products : Part 9 : Determination of hydroxyproline content
MS 954 : Part 12 : 1987
Methods of test for meat and meat products : Part 12 : Determination of chloride content (as sodium chloride)
MS ISO 5983 : 1996
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Kjeldahl method
MS ISO 6491 : 1996
Animal feeding stuffs - Determination of phosphorus content - Spectrometric method
MS ISO 6498 : 1996
Animal feeding stuffs - Preparation of test samples
MS 133 : Part E1 : 1973
Methods of test for paints and varnishes : Part E1: Bend test (Cylindrical mandrel)
MS 133 : Part E2 : 1973
Methods of test for paints and varnishes : Part E2 : Scratch test
MS 133 : Part E3 : 1973
Methods of test for paints and varnishes : Part E3 : Resistance to impact (Falling-weight test)
MS 133 : Part E4 : 1973
Methods of test for paints and varnishes : Part E4 : Cupping test
MS 133 : Part E5 : 1978
Methods of test for paints and varnishes : Part E5 : Pendulum damping test
MS 133 : Part E6 : 1976
Methods of test for paints and varnishes : Part E6 : Cross-cut test
MS 133 : Part E7 : 1980
Methods of test for paints and varnishes : Part E7 : Resistance to impact (Falling ball test)
MS 564 : 1978
Method of sampling liquefied petroleum gases (LPG)
MS 573 : 1979
Method of test for vapour pressure of liquefied petroleum gases (LPG method)
MS 983 : 1991
Specification for ‘KELUAR’ Signs (Internally illuminated)
MS ISO 3166 : 1995
Codes for the representation of names of countries
MS 146 : 1988
Specification for hot rolled steel bars for the reinforcement of concrete (First revision)
Amended Standards
Amendment No. 1 : 2000 to MS 979 : Part 2 : 1985
Specification for unplasticized PVC underground sewerage pipes and fittings : Part 2 : Pipes of diameter 200 millimetres and above
SINGAPORE
Established Standards
SS 146 : - Specification for safety of household and similar electrical appliances
Part 2 : 18 : 2000
(Modified adoption of IEC 60335-2-80 : 1997-04)
Particular requirements for fans
Part 2 : 19 : 2000 (Identical adoption of IEC 60335-2-59 : 1997-10)
Particular requirements for insect killers
SS 475 : - Specification for steel for the prestressing of concrete
Part 1 : 2000 (Adoption of ISO 6934-1 : 1991)
General requirements
Part 2 : 2000
(Adoption of ISO 6934-2 : 1991)
Cold-drawn wire
Part 3 : 2000
(Adoption of ISO 6934-3 : 1991)
Quenched and tempered wire
Part 4 : 2000
(Adoption of ISO 6934-4 : 1991)
Strand
Part 5 : 2000
(Adoption of ISO 6934-5 : 1991)
Hot-rolled steel bars with or without subsequent processing
SS 476 : 2000
Specification for high slag blastfurnace cement
SS 477 : 2000
Specification for Portland blastfurnace cements
SS 478 : - Specification for quantities and units
Part 0 : 2000
(Adoption of ISO 31-0 : 1992)
General principles
Part 1 : 2000 (Adoption of ISO 31-1 : 1992)
Space and time
Part 2 : 2000 (Adoption of ISO 31-2 : 1992)
Periodic and related phenomena
Part 2 : 2000 (Adoption of ISO 31-2 : 1992)
Periodic and related phenomena
Part 4 : 2000 (Adoption of ISO 31-4 : 1992)
Heat
Part 5 : 2000 (Adoption of ISO 31-5 : 1992)
Electricity and magnetism
Part 6 : 2000
(Adoption of ISO 31-6 : 1992)
Light and related electromagnetic radiations
Part 7 : 2000 (Adoption of ISO 31-7 : 1992)
Acoustics
Part 8 : 2000 (Adoption of ISO 31-8 : 1992)
Physical chemistry and molecular physics
Part 9 : 2000
(Adoption of ISO 31-9 : 1992)
Atomic and nuclear physics
Part 10 : 2000 (Adoption of ISO 31-10 : 1992)
Nuclear reactions and ionizing radiations
Part 11 : 2000 (Adoption of ISO 31-11 : 1992)
Mathematical signs and symbols for use in the physical sciences and technology
Part 12 : 2000 (Adoption of ISO 31-12 : 1992)
Characteristic numbers
Part 13 : 2000 (Adoption of ISO 31-13 : 1992)
Solid state physics
SS 479 : 2000
(Identical adoption of IEC 60155 : 1993-11 including IEC Amendment 1 : 1995-10)
Specification for glow-starters for fluorescent lamps
SS 480 : - Specification for residual current operated circuit-breaker with integral overcurrent protection for household and similar uses (RCBOs)
Part 1 : 2000
(Modified adoption of IEC 61009-1 : 1996-12)
General rules
Revised Standards
SS 26 : 2000
Specification for ordinary Portland cement
SS 97 : - Specification for residual current operated circuit-breaker without integral overcurrent protection for household and similar uses (RCCBs)
Part 1 : 2000 (Modified adoption of IEC 61008-1 : 1996-12)
General rules
SS 257 : - Specification for technical drawings
Part 2 : 2000
(Adoption of ISO 2692 : 1988)
Geometrical tolerancing - Maximum material principle
SS 289 : - Specification for concrete
Part 1 : 2000
Guide to specifying concrete
Part 2 : 2000
Methods for specifying concrete mixes
Part 3 : 2000
Specification for the procedures to be used in producing and transporting concrete
Part 4 : 2000
Specification for the procedures to be used in sampling, testing and assessing compliance of concrete
CP 12 : - Code of practice for the filling, inspection, testing and maintenance of containers for the storage and transport of compressed gases
Part 1: 2000
Seamless metal containers for gases, excluding dissolved acetylene
Withdrawn Standards
SS 53 : 1971
Guide for inter-conversion of values from one system of units to another
SS 54 : 1971
Specification for method of precise conversion of inch and metric dimensions to ensure inter-changeability
SS 55 : 1971
Specification for conversion factors and tables
SS 146 : - Specification for safety of household and similar electrical appliances
Part 1 : 1992
General requirements
SS 188 : 1978
Specification for insect electrocutors
SS 365 : 1993
Specification for safety requirements for electric fans and regulators for household and similar purposes
Confirmed Standards
CP 65 :- Structural use of concrete
Part 2 : 1996 (1999)
Special circumstances
