MS ISO 5510 : 1996
Animal feeding stuffs - Determination of available lysine.
MS ISO 5983 : 1996
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content.
MS ISO 5984 : 1996
Animal feeding stuffs - Determination of crude ash.
MS ISO 5985 : 1996
Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid.
MS ISO 6490/1 : 1996
Animal feeding stuffs - Determination of calcium content - Part 1 : Titrimetric method.
MS ISO 6490/2 : 1996
Animal feeding stuffs - Determination of calcium content - Part 2 : Atomic absorption spectrometric method.
MS ISO 6491 : 1996
Animal feeding stuffs - Determination of total phosphorus content - Spectrophotometric method.
MS ISO 6495 : 1996
Animal feeding stuffs - Determination of water- soluble chlorides content
MS ISO 6496 : 1996
Animal feeding stuffs - Determination of moisture content.
MS ISO 6498 : 1996
Animal feeding stuffs - Preparation of test samples.
MS ISO 6651 : 1996
Animal feeding stuffs - Determination of aflatoxin Bl content.
MS ISO 6654 : 1996
Animal feeding stuffs - Determination of urea content.
MS ISO 6866 : 1996
Animal feeding stuffs - Determination of free and total gossypol.
MS ISO 6870 : 1996
Animal feeding stuffs - Determination of zearalenone content.
MS ISO 9227 : 1996
Corrosion tests in artificial atmopsheres - Salt spray tests.
MS ISO 105-A01 : 1996
Textiles - Tests for colour fastness : Part A01 : General principles of testing.
MS ISO 105-A02 : 1996
Textiles-Tests for colour fastness: Part A02: Grey scale for assessing change in colour.
MS ISO 105-A03 : 1996
Textiles-Tests for colour fastness: Part A03: Grey scale for assessing staining
MS ISO 105-B0l : 1996
Textiles - Tests for colour fastness : Part B0l Colour fastness to light : Daylight.
MS ISO 105-C0l : 1996
Textiles - Tests for colour fastness : Part C01 : Colour fastness to washing : Test 1.
MS ISO 105-C02 : 1996
Textiles - Tests for colour fastness : Part C02 : Colour fastness to washing : Test 2.
MS ISO 105-C03 : 1996
Textiles - Tests for colour fastness : Part C03 : Colour fastness to washing : Test 3.
MS ISO 105-C04 : 1996
Textiles - Tests for colour fastness : Part C04 : Colour fastness to washing : Test 4.
MS ISO 105-C05 : 1996
Textiles - Tests for colour fastness : Part C05 : Colour fastness to washing : Test 5.
MS ISO 105-E04 : 1996
Textiles - Tests for colour fastness : Part E04 : Colour fastness to perspiration.
MS ISO 6941 : 1996
Textile fabrics - Burning behaviour - Measurement of flame spread properfies of vertically oriented specimens.
MS IEC 155 : 1996
Glow-starters for fluorescent lamps.
MS IEC 1204 : 1996
Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements.
MS IEC 320-1 : 1996
Appliance couplers for household and similar general purposes : Part 1 : General requirements.
MS IEC 320-2 : 1996
Appliance couplers for household and similar general purposes: Part 2: Interconnection couplers for household and similar equipment.
MS IEC 335-2-14 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for kitchen machines.
MS IEC 335-2-26 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for clocks.
MS IEC 335-2-28 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for sewing machines.
MS IEC 335-2-29 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for battery chargers.
MS IEC 335-2-73 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for fixed immersion heaters.
MS IEC 335-2-74 : 1996
Safety of household and similar electrical appliances : Part 2 : Particular requirements for portable immersion heaters.
MS IEC 364-1 : 1996
Electrical installations of buildings : Part 1 : Scope, object and fundamental principles.
MS IEC 364-2-21 : 1996
Electrical installations of buildings : Part 2 : Definitions : Chapter 21 : Guide to general terms.
MS IEC 364-3 : 1996
Electrical installations of buildings : Part 3 : Assessment of general characteristics.
MS IEC 364-4-41 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 41 : Protection against electric shock.
MS IEC 364-4-42 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 42 : Protection against thermal effects.
MS IEC 364-4-442 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 44 : Protection against overvoltages : Section 442 : Protection of low-voltage installations against faults between high-voltage systems and earth.
MS IEC 364-4-443 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 44 : Protection against overvoltages : Section 443 : Protection against overvoltages of atmospheric origin or due to switching.
MS IEC 364-4-45 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 45 : Protection against undervoltages.
MS IEC 364-4-46 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 46 : Isolation and switching.
MS IEC 364-4-47 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 47 : Application of protective measures for safety : Section 470 : General : Section 471 : Measures of protection against electric shock.
MS IEC 364-4-473 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 47 : Application of protective measures for safety : Section 473 : Measures of protection against overcurrent.
MS IEC 364-4-481 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 48 : Choice of protective measures as a function of external influences : Section 481 : Selection of measures for protection against electric shock in relation to external influence
MS IEC 364-4-482 : 1996
Electrical installations of buildings : Part 4 : Protection for safety : Chapter 48 : Choice of protective measures as a function of external influences : Section 482 : Protection against fire.
MS IEC 364-5-51 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 51 : Common rules.
MS [EC 364-5-52 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 52 : Wiring systems.
MS IEC 364-5-523 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 52: Wiring systems: Section 523: Current- carrying capacities.
MS IEC 364-5-53 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 53 : Switchgear and controlgear.
MS IEC 364-5-537 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 53 : Switchgear and controlgear: Section 537 : Devices for isolation and switching.
MS IEC 364-5-54 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 54: Earthing arrangements and protective conductor.
MS IEC 364-5-551 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 55: Other equipment: Section 551 : Low- voltage generating sets.
MS IEC 364-5-56 : 1996
Electrical installations of buildings : Part 5 : Selection and erection of electrical equipment : Chapter 56 : Safety services.
MS IEC 364-6-61 : 1996
Electrical installations of buildings : Part 6 : Verification : Chapter 61 : Initial verification.
MS IEC 364-7-702 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 702: Swimming pools.
MS IEC 364-7-703 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 703: Locations containing sauna heaters.
MS IEC 364-7-704 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 704 : Construction and demolition site installations.
MS IEC 364-7-705 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 705: Electrical installations of agricultural and horticultural premises.
MS IEC 364-7-706 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 706 : Restrictive conducting locations.
MS IEC 364-7-707 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 707 : Earthing requirements for the installations of data processing equipment.
MS IEC 364-7-708 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 708 : Electrical installations in caravan parks and caravans.
MS IEC 364-7-709 : 1996
Electrical installations of buildings : Part 7 : Requirements for special installations or locations : Section 709 : Marinas and pleasure craft.
MS IEC 432-1 : 1996
Safety specifications for incandescent lamps: Part 1 : Tungsten filament lamps for domestic and similar general lighting purposes.
MS IEC 432-2 : 1996
Safety specifications for incandescent lamps: Part 2 : Tungsten halogens lamps for domestic and similar general lighting purposes.
MS IEC 478-1 : 1996
Stabilized power supplies, d.c. output : Part 1 : Terms and definitions.
MS IEC 478-2 : 1996
Stabilized power supplies, d.c. output : Part 2 : Rating and performance.
MS IEC 478-3 : 1996
Stabilized power supplies, d.c. output : Part 3 : Reference levels and measurement of conducted electromagnetic interference (EMI).
MS IEC 478-4 : 1996
Stabilized power supplies, d.c. output: Part 4: Tests other than radio-frequency interference.
MS IEC 502 : 1996
Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30kV.
MS EN 60947-1 : 1996
Specification for low-voltage switchgear and controlgear : Part 1 : General rules.
MS EN 60947-4-1 : 1996
Specification for low-voltage switchgear and controlgear: Part 4 : Contactors and motor-starters : Section 1 : Electromechanical contactors and motor-starters.
MS ISO 6327 : 1996
Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers.
MS ISO 6570-1 : 1996
Natural gas - Determination of potential hydrocarbon liquid content - Part 1 : Principles and general requirements
MS ISO 6570-2 : 1996
Natural gas - Determination of potential hydrocarbon liquid content - Part 2 : Weighing method.
MS ISO 6570-3 : 1996
Natural gas - Determination of potential hydrocarbon liquid content - Part 3 : Volumetric method.
MS ISO 6974 : 1996
Natural gas - Determination of hydrogen, inert gases and hydrocarbons up to C8 - Gas chromatographic method.
MS ISO 6976 : 1996
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition.
MS ISO 6978 : 1996
Natural gas - Determination of mercury.
MS 1397 : 1996
Specification for sodium pentachlorophenate for use in the preservation of timber.
MS 1398 : Part 1 : 1996
Specification for mosquito electric liquid vaporizer : Part 1 : Physical and chemical requirements.
MS 1398: Part 2 : 1996
Specification for mosquito electric liquid vaporizer : Part 2 : Method for the evaluation of biological efficacy - Glass chamber method.
MS 1398: Part 3 : 1996
Specification for mosquito electric liquid vaporizer : Part 3 : Method for the evaluation of biological efficacy - Glass cylinder method.
MS 1399 : 1996
Specification for pressure sensitive adhesives paper masking tapes.
MS 1400 : 1996
Method of test for rubber threads.
MS 1314 : Part 2 : 1996
Specification for precast concrete piles : Part 2 : Special design small precast concrete piles.
MS 1401 : 1996
Grading rule for dressed timber, door jambs and general mouldings.
MS 1402 : 1996
Code of practice for sanitary system in buildings.
MS 1403 : 1996
Specification for electricity generating sets - Portable (up to 5kW).
MS 1404: Part 4 : 1996
Fire detection alarm systems for buildings : Part 4 : Specification for control and indicating equipment.
MS 1405 : 1996
Coding system for plastic products.
MS 1406 : 1996
Code of practice for system of tolerances for the dimension of plastics moulding.
MS 1407 : Part 1 : 1996
Specification for plastic containers: Part 1 : Screw thread, finishes for plastic containers.
MS 1407 : Part 2 : 1996
Specification for plastic containers : Part 2 : Capacity, mass and tolerances on dimensions for plastic containers having capacity of less than 5L.
MS 23 : Part 2 : 1996
Specification for mosquito coil : Part 2 : Method for the evaluation of biological efficacy - Glass chamber method (First revision).
MS 27 : 1996
Specification for precast concrete masonry units (First revision).
MS 400 : Chapter 161 : 1996
Electrotechnical vocabulary : Chapter 161 Electromagnetic compatibility (First revision).
MS 400 : Chapter 221 : 1996
Electrotechnical vocabulary : Chapter 221 : Magnetic materials and components (First revision).
MS 406 : 1996
Specification for voltages and frequency for alternating current transmission and distribution system (Second revision).
MS 859 : Part 3 : 1996
Specification for electricity meters : Part 3 : Specification for meters having class 1 electro- mechanical maximum demand indicators (First revision).
MS 277 : 1996
Specification for motorcycle batteries (Second revision).
MS 1 : 1996
Specification for protective helmets for vehicle users (Second revision).
MS 572 : 1996
Method of test for ductility of bituminous materials (First revision).
MS 685 : 1996
Method of test for specific gravity and density of semi-solid bituminous materials (First revision).
MS 735 : 1996
Specification for plastic feeding bottles.
MS 1073 : Part 2 : 1996
Specification for fire resistant doorsets : Part 2 : Methods for determination of the fire resistance - General principles,
MS 1073 : Part 3 : 1996
Specification for fire resistant doorsets : Part 3 : Methods for determination of the fire resistance - Type of doorsets.
MS 1391 : 1996 (P)
Specification for emergency triangle reflector for motor vehicles.
MS 1392 : 1996 (P)
Test method for the analysis of soluble proteins in natural rubber latex-dipped and dry rubber products.
MS 439 : 1976
Method for the determination of mesh breaking load of netting for fishing.
MS 440 : 1976
Methods for the determination of breaking load and knot breaking load of netting yarns for fishing nets.
MS 584 : 1979
Method for the determination of change in length of netting yarns after immersion in water.
MS 690 : 1981
Method for the determination of elongation of netting yarns for fishing nets.
MS 951 : 1996
Specification for fresh long beans (First revision).
MS 1393 : 1996
Specification for Chinese cabbage.
MS 893 : 1996
Specification for fresh tomatoes (First revision).
MS 1124 : 1996
Specification for fresh sweet pepper (Bell pepper) (First revision).
MS 956 : 1996
Specification for fresh cucumbers (First revision)
MS 133 : Part Al 4 : 1996
Methods of test for paints and varnishes and their raw materials : Part A14 : Temperatures and humidities for conditioning and testing
MS 133 : Part Cl : 1996
Methods of test for paints and varnishes : Part Cl : Determination of wet edge time (First revision),
MS 133 : Part C2 : 1996
Methods of test for paints and varnishes : Part C2 : Surface-drying test (Ballotini method) (First revision).
MS 133 : Part C3 : 1996
Methods of test for paints and varnishes : Part C3 : Through-dry test (First revision).
MS ISO 8402 : 1996
Quality management and quality assurance- Vocabulary (First revision).
MS ISO 9000-1 : 1996
Quality management and quality assurance standards : Part 1 : Guidelines for selection and use.
MS ISO 9000-2 : 1996
Quality management and quality assurance standards : Part 2 : Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003.
MS ISO 9000-4 : 1996
Quality management and quality assurance standards : Part 4 : Guide to dependability programme management.
MS ISO 9004-1 : 1996
Quality management and quality system elements : Part 1 : Guidelines (First revision).
MS ISO 9004-3 : 1996
Quality management and quality system elements : Part 3 : Guidelines for processed materials.
MS ISO 9004-4 : 1996
Quality management and quality system elements : Part 4 : Guidelines for quality improvement.
MS ISO 10013 : 1996
Guidelines for developing quality manuals.
MS ISO 1394 : 1996
Specification for new pneumatic tyres for highway vehicles other than passenger cars.
MS ISO 30 : 1996
Terms and definitions used in connection with reference materials.
MS 1395 : 1996
Specification for pillar hydrants.
MS 396 : 1996
Specification for ferrules.
MS ISO/IEC 9646-1 : 1996
IT-OSI-Conformance testing methodology and framework : Part 1 : General concepts.
MS ISO/IEC 9646-2 : 1996
IT-OSI-Conformance testing methodology and framework: Part 2: Abstract test suite specification.
MS ISO/IEC 9646-3 : 1996
IT-OSI-Conformance testing methodology and framework: Part 3: The tree and combined notation (TTCN).
MS ISO/IEC 9646-4 : 1996
IT-OSI-Conformance testing methodology and framework : Part 4 : Test realization.
MS ISO/IEC 9646-5 : 1996
IT-OSI-Conformance testing methodology and framework : Part 5 : Requirements on test laboratories and clients for the conformance assessment process.
MS ISO/IEC 9646-6 : 1996
IT-OSI-Conformance testing methodology and framework : Part 6 : Protocol profile test specification.
MS ISO/IEC ISP 10609-1 : 1996
IT-ISP TB, TC,TD and TE - Connection-mode Transport Service over Connection-mode Network Service : Part 1 : Subnetwork-type independent requirements for Group TB.
MS ISO/IEC ISP 10609-2 : 1996
IT-ISP TB, TC, TD and TE - Connection-mode Transport Service over Connection-mode Network Service : Part 2 : Subnetwork-type independent requirements for Group TC.
MS ISO/IEC ISP 10609-3 : 1996
IT-ISP TB, TC, TD and TE - Connection-mode Transport Service over Connection-mode Network Service : Part 3 : Subnetwork-type independent requirements for Group TD
MS ISO/IEC ISP 10609-4 : 1996
IT-ISP TB, TC, TD and TE - Connection-mode Transport Service over Connection-mode Network Service : Part 4 : Subnetwork-type independent requirements for Group TE
MS ISO/IEC ISP 10613-1 : 1996
IT-international Standardized Profile RA - Relaying the Connectionless-mode Network Service : Part 1 : Subnetwork-independent requirements
MS ISO/IEC ISP 10613-2 : 1996
IT-International Standardized Profile RA- Relaying the Connectionless-mode Network Service : Part 2 : LAN subnetwork-dependent, media- independent requirements
MS ISO/IEC 10742 : 1996
IT-Telecommunications and information exchange between systems - elements of management information related to OSI data link layer standards
MS ISO/IEC 10165-4 : 1996
IT-OSI - Management information services - Structure of information management : Part 4 : Guidelines for the definition of managed objects
MS ISO/IEC 10165-5 : 1996
IT-OSI - Management information services - Structure of information management : Part 5 : Generic management information
MS ISO/IEC 10165-6 : 1996
IT-OSI - Management information services- Structure of information management : Part 6 : Requirements and guidelines for implementation conformance statement proforma associated with OSI management
MS ISO/IEC 10739-1 : 1996
IT-OSI - Conformance test suite for ISO 9041-1, Virtual terminal basic class protocol : Part 1 : Test suite structure and test purposes
MS ISO/IEC 8802-1 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 1 : Overview of local area network standards
MS ISO/IEC 8802-2 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 2 : Logical link control
MS ISO/IEC 8802-3 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 3 : Carrier sense multiple access with collision detection (CSMA/CA) access method and physical layer specifications
MS ISO/IEC 8802-4 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 4 : Token-passing bus access method and physical layer specifications.
MS ISO/IEC 8802-5 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 5 : Token ring access method and physical layer specifications.
MS ISO/IEC 8802-6 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks : Part 6 : Distributed Queue Dual Bus (DQDB) access method and physical layer specifications.
MS ISO/IEC 88-2-7 : 1996
IT-Telecommunication and information exchange between systems - Local and metropolitan area networks: Part 7: Slotted ring access method and physical layer specifications.
MS ISO/IEC TR 11802-4 : 1996
IT-Telecommunications and information exchange between systems - Local and metropolitan area networks : Part 4 : Token ring access method and physical layer specifications - Fibre optic station affachment.
MS ISO/IEC 15802-4 : 1996
IT-Telecommunications and information exchange between systems - Local and metropolitan area networks: Common specifications: Part 4: System local protocal.
MS ISO/IEC 11 571 : 1996
IT-Telecommunication and information exchange between systems - Numbering and sub-addressing in private integrated services network.
MS ISO/IEC 11572 : 1996
IT-Telecommunication and information exchange between systems - Private integrated services network - Circuit mode bearer services-inter- exchange signalling procedures and protocol.
MS ISO/IEC 11574 : 1996
IT-Telecommunication and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services- Service description, functional capabilities and information flows.
MS ISO/IEC 11579-1 : 1996
IT-Telecommunication and information exchange between systems - Private integrated service network: Part 1 : Reference configuration for PISN exchanges (PINX) specifications.
MS ISO/IEC 9592-4 : 1996
IPS-Computer Graphics -Programmers Hierarchi- cal Interactive Graphics Systems (PHIGS) : Part 4 : PHIGS PLUS, and TC 1 : 94.
MS ISO/IEC 9637-1 : 1996
IT-Computer Graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Data stream binding : Part I : Character encoding.
MS ISO/IEC 9637-2 : 1996
IT-Computer Graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Data stream binding : Part 2 : Binary encoding.
MS ISO/IEC 10641 : 1996
IT-Computer graphics and image processing - Procedures for registration of graphical items.
MS ISO/IEC 12087-2 : 1996
IT-Computer Graphics and image processing - Conformance testing of implementation of graphics standards (RA).
MS ISO/IEC 12075 : 1996
IT-Customer premises cabling - Planning and installation guide to support ISO/IEC 8802-5 token ring stations.
MS ISO/IEC 2382-23 : 1996
IT-Vocabulary : Part 23 : Text processing.
MS ISO/IEC 10183-1 : 1996
IT-Text and office systems - Office Document architecture (ODA) and interchange format - Technical Report on ISO 8613 implementation testing : Part 1 : Testing methodology.
MS ISO/IEC 10183-2 : 1996
IT-Text and systems - Office Document architecture (ODA) and interchange format - Technical Report on ISO 8613 implementation testing : Part 2 : Framework for abstract test cases.
MS ISO/IEC 10740-1 : 1996
IT-Text and office systems-Referenced data transfer Part 1 : Abstract service definition.
MS ISO/IEC 10740-2 : 1996
IT-Text and office systems-Referenced data transfer Part 2 : Protocol specification
MS ISO 10160 : 1996
Information and documentation - OSI - Interlibrary loan application service definition.
MS ISO 12083 : 1996
Information and documentation - Electronic manuscrip preparation and markup.
MS ISO/IEC 11693 : 1996
Identification cards - Optical memory cards - General characteristics.
MS ISO/IEC 11694-1 : 1996
Identification cards - Optical memory cards - Linear recording method: Part 1 : Physical characteristics
MS ISO/IEC 13213 : 1996
IT-Microprocessor systems - Control and status register (CSR) architecture for microcomputer buses.
MS ISO/IEC 9834-1 : 1996
IT-OSI - Procedures for the operation of OSI registration authorities : Part 1: General procedures.
MS ISO/IEC 9834-2 : 1996
FT-OSI - Procedures for the operation of OSI registration authorities : Part 2 : Registration procedures for OSI document types.
MS ISO/IEC 9834-4 : 1996
IT-OSI - Procedures for the operation of OSI registration authorities : Part 4 : Registration of VTE profiles.
MS ISO/IEC 9834-5 : 1996
IT-OSI - Procedures for the operation of OSI registration authorities : Part 5 : Registration of VT control object definities.
MS ISO/IEC 9834-6 : 1996
IT-OSI - Procedures for the operation of OSI registration authorities : Part 6 : Application processes and application entities.
MS ISO/IEC 10177 : 1996
IT-Telecommunications and information exchange between systems, provision of the connection- mode network internal layer service by intermediate systems using ISO/I EC 8208, the X.25 packet layer protocol.
MS ISO/IEC TR 9577 : 1996
IT-Telecommunications and information exchange between systems, protocol identification in the network layer.
MS ISO 10202-6 : 1996
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards : Part 6 : Cardholder verification.
MS GSM 11.11 : 1996
Digital cellular telecommunications system (Phase 2), specification of the Subscriber Identity Module - Mobile equipment (SIM-ME) interface.
MS 118 : Part 1 : 1996
Specification for motor vehicle gasoline : Part 1 - Leaded gasoline (Third revision).
MS 124 : 1996
Specification for penetration grade of bitumen for use in pavement construction (First revision).
WITHDRAWN
MS 1157: Part 1 : 1993
Methods of test for vulcanized rubber : Part 1 Determination of hardness.
MS 3 : 1982
Methods of test for animal feeds and feedstuffs (First revision).
MS 133: Part Cl : 1973
Methods of test for paints and varnishes : Part Cl : Determination of wet edge time.
MS 133 : Part C2 : 1973
Methods of test for paints and varnishes : Part C2 : Surface-drying test (Ballotini method).
MS 133 : Part C3 : 1973
Methods of test for paints and varnishes : Part C3 : Through-dry test.
MS 308 : Part 1 : 1976
Methods of test for colour fastness of textiles : Part 1 : General
MS 308 : Part 2 : 1976
Methods of test for colour fastness of textiles : Part 2 : Grey scale for assessing change in colour.
MS 308 : Part 3 : 1981
Methods of test for colour fastness of textiles : Part 3 : Grey scale for assessing staining.
MS 308: Part 4 : 1981
Methods of test for colour fastness of textiles : Part 4 : Colour fastness to light : Daylight.
MS 308 : Part 8 : 1975
Methods of test for colour fastness of textiles : Part 8 : Colour fastness to perspiration.
MS 308 : Part 12 : 1975
Methods of test for colour fastness of textiles Part 12 : Colour fastness to washing : Test 1.
MS 308 : Part 13 : 1975
Methods of test for colour fastness of textiles : Part 13 : Colour fastness to washing : Test 2.
MS 308 : Part 14 : 1975
Methods of test for colour fastness of textiles : Part 14 : Colour fastness to washing : Test 3.
MS 308 : Part 15 : 1975
Methods of test for colour fastness of textiles : Part 15 : Colour fastness to washing : Test 4.
MS 308 : Part 16 : 1975
Methods of test for colour fastness of textiles : Part 16 : Colour fastness to washing : Test 5.
MS 472 : Part 1 : 1976
Specification for testing and approval of household and similar appliances : Part 1 : General requirements.
MS 472 : Part 2 : Sec.2.2 : 1977
Specification for testing and approval of household and similar appliances: Particular requirements for toasters, grills, waffle irons and roasters.
MS 472 : Part 2 : Sec.2.3 : 1981
Specification for testing and approval of household and similar appliances: Particular requirements for electric irons
MS 400 : Part 1 : Gr.07 : 1979
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms : Part 1 : Terms common to power, telecommunications and electronics : Group 07 : Magnetism terminology.
MS 400: Part 1 : Gr.09 : 1986
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms : Part 1 : Terms common to power, telecommunications and electronics : Group 09 : Radio interference terminology.
MS 806 : 1982 (P)
Pressure regulators and automatic change-over devices for liquefied petroleum gases.
